ATHS - Truck & Transportation History
Home       Members    Calendar    Who's On
Welcome Guest ( Login | Register )
        



I need help to identify the rear axle and... Expand / Collapse
Author
Message
Posted 6/29/2009 2:53:45 PM
---->

---->---->---->---->---->---->---->---->

Group: Forum Members
Last Login: 8/20/2009 11:51:37 AM
Posts: 1, Visits: 9
I have collected a bunch of numbers from the rear axle ( off the end of the pinion shaft ) and from the 4 speed non-syncromesh trans. ( both casting and stamped numbers ) from my 1949 509 L Diamond T truck. My question is : now that I have the numbers , how do I go about finding what these numbers translate to ?? - Spicer,Clark,Timken & model #'s etc. - The Trans. & clutch assy. ( Lippe-Rollaway ) are originaly out of a 1938 406 D Diamond T.

Any help would be greatly appreciated.

Post #54756
Posted 7/1/2009 9:15:50 PM
ATHS RVP Maine/New Hampshire

ATHS RVP Maine/New HampshireATHS RVP Maine/New HampshireATHS RVP Maine/New HampshireATHS RVP Maine/New HampshireATHS RVP Maine/New HampshireATHS RVP Maine/New HampshireATHS RVP Maine/New HampshireATHS RVP Maine/New Hampshire

Group: Forum Members
Last Login: 3/6/2010 10:23:18 PM
Posts: 108, Visits: 703
My 1954 Motors Truck Manual lists for the 1946-49 DT 509:

stock engine - Hercules JXB (L head six; 263 c.i.; 109 hp @ 3200)

stock transmission - Clarl 205V (five speed forward; direct in fifth)

stock rear axle -Timken H100 - single reduction; single speed

My 1946 Motors Truck Manual lists the components offered by the various manufacturers (ie 12-14 Brown-Lipe transmissions) but does not match them with truck year and model. If you have a transmission model number I may (or may not) be able to put some information against it.

Clayton

ATHS Online Division Member

Post #54939
Posted 7/1/2009 9:37:34 PM
ATHS Member

ATHS MemberATHS MemberATHS MemberATHS MemberATHS MemberATHS MemberATHS MemberATHS Member

Group: Forum Members
Last Login: Today @ 8:25:22 AM
Posts: 595, Visits: 3,499
The 4 speed trans is likely to be a Warner T9. What are the #'s on the pinion? Just divide for the ratio.

Progress may have been all right once, but it has gone on too long.
Post #54944
« Prev Topic | Next Topic »


All times are GMT -5:00, Time now is 5:42pm

Powered by InstantForum.NET v4.1.4 © 2010
Execution: 0.078. 6 queries. Compression Disabled.

 

The American Truck Historical Society

preserving the history of trucks, the trucking industry, and its pioneers

Click here to Join Now!

 info@aths.org